Stiebel Eltron DHCE 8/50 Single Phase 9.5KW Instantaneous Electric Hot Water Heater

Stiebel Eltron DHCE 8/50 Single Phase 9.5KW Instantaneous Hot Water Heater

By only using energy to heat your water when you turn on a tap, the Stiebel Eltron DHCE 8/50 Single Phase 9.5KW Instantaneous Hot Water Heater helps you save on your energy bill while still providing reliable hot water.

Additional features include:

• Modern carbon look and space saving design
• Electronically controlled
• Choose from three temperature ranges for greater convenience: 40°C 45°C 50°C
• Delivers a maximum of 50°C hot water in accordance with AS3498
• No safe tray or drainage required (check local regulations)
• WaterMark approved, Lic. No. WMKA21273, AS3498
• Tubular heating element
• Also available in DHCE 6/50  & DHCE 8/60

Please note, when installing, the DHCE units need to be installed close to your primary hot water outlet. It will, however, deliver powerful hot water to an y outlet in your house or commercial space.

WARRANTY

5 Year full parts and labour domestic warranty

SPECIFICATIONS

Model number DHCE 6/50 DHCE 8/50

Rated output (240V) 7.1kW 9.5kW

Rated current (240V) 30Amp 40Amp

Phases 1/N/PE/AC 220..240V 1/N/PE/AC 220..240V

Electrical Installation As per AS/NZS3000

Installation requirements AS/NZS3500.4.2 & local requirements

Switch on flow rate (minimum flow rate required to switch on the water heater) 1.5L/min 1.5L/min

Permissible operating pressure 1000kPa 1000kPa

Temperature adjustment •40°C •• 45°C •••50°C •40°C •• 45°C •••50°C

IP Rating IP25 IP25

Height 360mm 360mm

Width 200mm 200mm

Depth 110mm 110mm

Weight (filled with water) 2.45kg 2.45kg

Colour Silver look Silver look

Nominal capacity 0.45L 0.45L

Approvals WaterMark Lic No. WMKA21273, AS3498

For one/several draw off points Yes/Yes Yes/Yes

Heating system Tubular Tubular

Electronic flow rate control No No

Electronic air detection system No No

Accepts pre-heated water (solar) No No

Programmable temperature No No